Goodbye Chrome Plating… Hello Plasma Ion Nitriding!
Tired of flaking, spalling, chipping, and edge build-up problems associated with wet-bath plating processes and the high rework costs of stripping, re-plating, or replacing your parts?
Plasma nitriding is a diffusion-type process. It is not a surface coating that can come off. It is an actual surface transformation that produces a wear-resistant layer on the material’s surface with no dimensional changes.
With additional PLASOX® post-plasma oxidation treatment, your parts can achieve corrosion protection superior to chrome plating without surface build-up.
No Unwanted Surface Build-Up
In many cases, unwanted chrome plating can web across small cavities and build up in corners or on critical surfaces. Grinding or other material-removal methods may then be necessary to remove the excessive build-up, leading to additional unforeseen production costs.
Plasma Nitriding with PLASOX® vs. Chrome Plating
| Comparison | Plasma Nitriding with PLASOX® | Chrome Plating |
|---|---|---|
| Surface build-up | No | Yes |
| Post-treatment machining required? | No | Yes |
| Increases fatigue strength? | Yes | No |
| Hazards to the environment? | No | Yes |
| Hazards to humans? | No | Yes |
| Corrosion resistance | Better | Good |
| Cost | Lower | Higher |
Is Plasma Ion Nitriding Right for Your Application?
Contact JGS Nitriding to learn more about replacing chrome plating with plasma ion nitriding and PLASOX® treatment.